The following procedure can be used to configure
a simple ESRP topology:
-
Create and configure a VLAN
that will become the master VLAN. (See VLANs.)
-
As needed, create and configure the VLANs that will become
the member VLANs. (See VLANs.)
-
Create the ESRP domain as described in Creating and Deleting an ESRP Domain.
-
If your configuration requires an ESRP domain ID,
configure it as described in .
-
Add the master VLAN to the ESRP domain as described in
Adding and Deleting a Master VLAN.
-
If your configuration requires member VLANs, add the
member VLANs to the ESRP domain as described in Adding and Deleting a Member VLAN.
-
Enable ESRP for the specified ESRP domain as described in
Enabling and Disabling an ESRP Domain.
You can also configure other ESRP domain parameters, including ESRP:
For more detailed information about all of the commands used to create,
configure, enable, and disable an ESRP domain, refer to the
Switch Engine v33.1.1 Command Reference Guide
.
